high CVSS 8.8

CVE-2026-99312·Kernel vulnerability

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Unconditionally reset MMU context when emulating INIT Force an MMU reset when emulating an INIT even if paging was already disabled, as the MMU page role includes guest_mode (L2), i.e. an INIT while L2 is running with CR0.PG=0 will result in KVM running L1 with a stale MMU context. Alternatively, the reset could be scoped strictly to paging being enabled or L2 being active, but SMM is also encoded in the page role. Even though it _should_ be impossible for the vCPU to be INIT'd while SMM is active, there's zero value in not handling SMM. At that point, the only scenario where KVM _doesn't_ need to reset the MMU context is on an INIT with the vCPU running in Real Mode or Unpaged Protect Mode, and while INIT in those modes is somewhat common, it's far from a hot path and re-initializing the MMU is not expensive, especially when the role isn't changing (KVM elides most of the re-configuration in that case). Note, like the Fixes commit, this bug only affects nested SVM as INIT is an unconditional intercept on VMX, i.e. it's impossible to emulate INIT while L2 is active. Temporarily keep the guest TLB flush when CR0.PG is being cleared even though it is fully redundant with the flush that is emitted on all INIT events (KVM itself only does RESET when a vCPU is being created, i.e. when CR0.PG must be '0').

Severity
high
Software
Kernel
Fixed in
6.12.118, 6.18.64, 7.3.5, 7.4-rc2
Published

How to fix this CVE

Update your Linux kernel to a patched version to fix a memory management unit (MMU) context reset issue in nested virtualization environments. If you are running kernel 6.12.x, update to 6.12.118 or later; for 6.18.x, update to 6.18.64 or later; for 7.3.x, update to 7.3.5 or later; or for mainline, update to 7.4-rc2 or later. Alternatively, install your Linux distribution's patched kernel package, which will be released through standard security channels.

sudo dnf update kernel

Defensia detects this vulnerability

How to check if you are affected

  1. Step 1: Check your installed kernel version with: uname -r
  2. Step 2: Verify if you are running nested virtualization (KVM/libvirt) by checking: lsmod | grep kvm
  3. Step 3: If using nested SVM, check for stale MMU context errors in kernel logs: sudo journalctl -k | grep -i 'mmu\|page.*role\|context'
  4. Step 4: After patching, confirm the new kernel version with: uname -r and verify it matches or exceeds the fixed version for your branch

FAQ

What is CVE-2026-99312?

This is a vulnerability in the Linux kernel's KVM (Kernel Virtual Machine) hypervisor where the MMU context is not properly reset during INIT emulation in nested virtualization scenarios, potentially allowing a stale memory management state to persist when transitioning between guest modes in nested SVM environments.

Is CVE-2026-99312 being actively exploited?

No, there are no known active exploits or public exploit code available for this vulnerability. It is not listed on CISA's Known Exploited Vulnerabilities (KEV) catalog.

What versions of Kernel are affected by CVE-2026-99312?

The vulnerability affects kernels prior to version 6.12.118 (6.12.x branch), 6.18.64 (6.18.x branch), 7.3.5 (7.3.x branch), and mainline versions before 7.4-rc2. The exact affected range across all versions is currently unknown, but all users should update to the fixed versions listed for their kernel branch.

How do I check if my server is vulnerable to CVE-2026-99312?

Run uname -r to get your kernel version, then compare it against the fixed versions: if you're on 6.12.x check if it's before 6.12.118; on 6.18.x check if it's before 6.18.64; on 7.3.x check if it's before 7.3.5. Additionally, verify you are running nested virtualization with lsmod | grep kvm to determine exposure.

Does Defensia detect CVE-2026-99312?

Yes — Defensia's CVE advisory scanner compares installed package versions against the NVD database. If the Linux kernel is installed on a monitored server, CVE-2026-99312 will appear in your dashboard with remediation steps tailored to your kernel version and distribution.

Related Kernel CVEs

CVE-2026-63795CVSS 10In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request.
CVE-2026-64136CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked() Commit 96c4af418586 ("cifs: Fix locking usage for tcon fields") refactored cifs code to change cifs_tcp_ses_lock for tc_lock around tc_count changes. There was missing lock around tc_count increment inside smb2_find_smb_sess_tcon_unlocked().
CVE-2026-64162CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: idpf: fix read_dev_clk_lock spinlock init in idpf_ptp_init() In idpf_ptp_init(), read_dev_clk_lock is initialized after ptp_schedule_worker() had already been called (and after idpf_ptp_settime64() could reach the lock). The PTP aux worker fires immediately upon scheduling and can call into idpf_ptp_read_src_clk_reg_direct(), which takes spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering the lockdep "non-static key" warning: [12973.796587] idpf 0000:83:00.0: Device HW Reset initiated [12974.094507] INFO: trying to register non-static key. ... [12974.097208] Call Trace: [12974.097213] <TASK> [12974.097218] dump_stack_lvl+0x93/0xe0 [12974.097234] register_lock_class+0x4c4/0x4e0 [12974.097249] ? __lock_acquire+0x427/0x2290 [12974.097259] __lock_acquire+0x98/0x2290 [12974.097272] lock_acquire+0xc6/0x310 [12974.097281] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097311] ? lockdep_hardirqs_on_prepare+0xde/0x190 [12974.097318] ? finish_task_switch.isra.0+0xd2/0x350 [12974.097330] ? __pfx_ptp_aux_kworker+0x10/0x10 [ptp] [12974.097343] _raw_spin_lock+0x30/0x40 [12974.097353] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097373] idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097391] ? kthread_worker_fn+0x88/0x3d0 [12974.097404] ? kthread_worker_fn+0x4e/0x3d0 [12974.097411] idpf_ptp_update_cached_phctime+0x26/0x120 [idpf] [12974.097428] ? _raw_spin_unlock_irq+0x28/0x50 [12974.097436] idpf_ptp_do_aux_work+0x15/0x20 [idpf] [12974.097454] ptp_aux_kworker+0x20/0x40 [ptp] [12974.097464] kthread_worker_fn+0xd5/0x3d0 [12974.097474] ? __pfx_kthread_worker_fn+0x10/0x10 [12974.097482] kthread+0xf4/0x130 [12974.097489] ? __pfx_kthread+0x10/0x10 [12974.097498] ret_from_fork+0x32c/0x410 [12974.097512] ? __pfx_kthread+0x10/0x10 [12974.097519] ret_from_fork_asm+0x1a/0x30 [12974.097540] </TASK> Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock is not touched before it's been initialized.
CVE-2026-53384CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails dw8250_probe() registers the 8250 port via serial8250_register_8250_port() and then, if the device has a clock, registers a clock notifier. If clk_notifier_register() fails, probe returns the error but leaves the 8250 port registered. The matching serial8250_unregister_port() lives in dw8250_remove(), which is not called when probe fails, so the port slot stays occupied until the device is rebound or the system is rebooted. The devm-allocated driver data is freed while the port still references it (via the saved private_data and serial_in/serial_out callbacks), so any access to that port slot before a rebind is a use-after-free hazard. Unregister the port on the clk_notifier_register() error path.
CVE-2026-53086CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix racing timeout handler The bcmgenet_timeout handler tries to take down all tx queues when a single queue times out. This is over zealous and causes many race conditions with queues that are still chugging along. Instead lets only restart the timed out queue.

References

Track CVEs across your fleet automatically

Defensia scans your Linux servers and tells you exactly which ones are running vulnerable versions — including CVE-2026-99312. Free for 1 server.

Get started free