high CVSS 8.8

CVE-2026-98980·Kernel vulnerability

In the Linux kernel, the following vulnerability has been resolved: namei: don't reveal overmounted entries in refwalk In rcuwalk the dentry is validated before it is accepted. step_into() step_into() rechecks d_seq and __follow_mount_rcu() rechecks mount_lock. An entry that gets unlinked in between causes the lookup to retry and miss. A refwalk doesn't do this. lookup_fast() takes a reference on the hashed dentry and simply accepts it. So an unlink that happens after the reference was taken isn't seen by refwalk. That's fine for a simple file. We just happened to open it before it was unlinked, no problem. For a mountpoint and specifically a locked mountpoint it very much isn't. The unlink detaches all mounts and then removes the name. Any refwalk that hasn't traversed the mounts yet simply reveals the underlying entry. It's a very narrow window but it can be hit: reads of a covered file in 60 s, 3 walkers, ~15000 unlinks no widening 27 that step + 200 us 3741 See the appended patch for a more reliable reproducer. So check the entry after step_into(). unlink(), rmdir() and rename() mark the dentry with dont_mount() before they detach the mounts and remove the dentry. So a dentry that is marked with DCACHE_CANT_MOUNT and is unhashed by the time its mounts were looked at is a name that was unlinked under the refwalk. DCACHE_CANT_MOUNT is read after the mounts were looked up and it is set before they are detached by detach_mounts(). A refwalk that missed the mounts will see DCACHE_CANT_MOUNT. Plain d_unlinked() is fine. A rename takes the dentry off its hash chain but ___d_drop() leaves d_hash.pprev set. So only __d_drop() and a rename over the dentry unhash it. The only move that flips IS_ROOT splices in a disconnected alias. That doesn't have DCACHE_CANT_MOUNT set. Add the to step_into_slowpath(). ".." and LOOKUP_DOWN may legitimately land on an unhashed directory. A refwalk that crossed onto a mount has path.mnt different from nd->path.mnt. A dentry that a filesystem dropped on its own (d_invalidate(), d_drop()) doesn't have the flag set and is treated as before. // SPDX-License-Identifier: GPL-2.0 /* * unlink_covered: unlink a file that is a mountpoint in a detached copy of * its mount, against walkers that open it through that copy. * * A is a tmpfs with the file f1 (content SECRET_F) and the plain file * MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound * on A'/f1, held through an O_PATH fd on its root once the tree fd is * closed. Walkers open f1 through that fd while the driver unlinks A/f1, * where nothing is mounted on it. A walker may read MARK_A or get ENOENT. * A read of SECRET_F is a hit: the name was found after its mount was * gone. The lockless walks use openat2(RESOLVE_CACHED). * * usage: unlink_covered [-t seconds] [-w walkers] */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <errno.h> #include <fcntl.h> #include <pthread.h> #include <stdatomic.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/mount.h> #include <sys/stat.h> #include <sys/syscall.h> #include <linux/openat2.h> #ifndef __NR_open_tree #define __NR_open_tree 428 #endif #ifndef __NR_move_mount #define __NR_move_mount 429 #endif #ifndef __NR_openat2 #define __NR_openat2 437 #endif #ifndef OPEN_TREE_CLONE #define OPEN_TREE_CLONE 1 #endif #ifndef OPEN_TREE_CLOEXEC #define OPEN_TREE_CLOEXEC O_CLOEXEC #endif #ifndef MOVE_MOUNT_F_EMPTY_PATH #define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 #endif #define WORK "/tmp/uc" #define ADIR WORK "/A" static int duration = 60, nwalkers = 3; static atomic_int stop, writer_waiting; static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER; static int cur_fd = -1; /* the root of A', -1 while there is none */ static atomic_long n_unlink, n_walk, n_mark, n_enoent, n_othe ---truncated---

Severity
high
Software
Kernel
Fixed in
6.12.113, 6.18.57, 7.2.11, 7.3
Published

How to fix this CVE

Update your Linux kernel to a patched version to prevent unauthorized access to files that should be hidden by mount points. Apply the stable kernel update for your branch: 6.12.113, 6.18.57, 7.2.11, or mainline 7.3+. Most users should use their distribution's kernel package rather than compiling from source to ensure proper integration and support.

sudo dnf update kernel kernel-devel

Defensia detects this vulnerability

How to check if you are affected

  1. Step 1: Check your current kernel version with `uname -r` and compare against the fixed versions (6.12.113, 6.18.57, 7.2.11, 7.3+)
  2. Step 2: Verify if your kernel is vulnerable by checking if the version is older than the patched release in your stable branch
  3. Step 3: Search system logs for ENOENT or permission denied errors when accessing files that should be mount points with `grep -i 'permission denied\|enoent' /var/log/kern.log | head -20`
  4. Step 4: After patching, reboot the system and confirm the new kernel is active with `uname -r`, then verify the DCACHE_CANT_MOUNT flag behavior is enforced

FAQ

What is CVE-2026-98980?

This is a kernel vulnerability in the namei (name lookup) subsystem that allows unprivileged attackers to bypass mount point protections during reference walk operations. An attacker can race with file unlinking to reveal the underlying filesystem beneath a mount point, potentially exposing sensitive data.

Is CVE-2026-98980 being actively exploited?

No, CVE-2026-98980 is not listed in the CISA KEV catalog and no public exploits are known. However, it is a high-severity vulnerability (CVSS 8.8) that requires a narrow race condition to trigger.

What versions of Kernel are affected by CVE-2026-98980?

All kernel versions before the fix are potentially affected. Patched versions are: 6.12.113 and later (6.12 branch), 6.18.57 and later (6.18 branch), 7.2.11 and later (7.2 branch), and 7.3+ (mainline). Users should upgrade within their current stable branch rather than jumping to a new major version.

How do I check if my server is vulnerable to CVE-2026-98980?

Run `uname -r` to get your kernel version. If your version is older than 6.12.113, 6.18.57, 7.2.11, or 7.3 (depending on your branch), you are vulnerable.

Does Defensia detect CVE-2026-98980?

Yes — Defensia's CVE advisory scanner compares installed package versions against the NVD database. If the Linux kernel is installed on a monitored server, CVE-2026-98980 will appear in your dashboard with remediation steps and the specific patched version available for your branch.

Related Kernel CVEs

CVE-2026-63795CVSS 10In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request.
CVE-2026-64113CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: ixgbevf: fix use-after-free in VEPA multicast source pruning ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible.
CVE-2026-64125CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: keep RBUF EEE/PM disabled Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX path on GENET hardware once MAC EEE becomes active. RX traffic stops flowing while the link stays up and the usual descriptor/RX error counters remain quiet. In that state the MAC still accepts frames (rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to DMA, so rx_packets is no longer incremented at the netdev level. On some boards the corruption ends up as a paging fault in skb_release_data via bcmgenet_rx_poll on an LPI exit. Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian Fainelli on an internal Broadcom 4908-family board with the same crash signature. RBUF_PM_EN is not publicly documented. This shows up more often now that phy_support_eee() enables EEE by default, but it also affects older kernels as soon as TX LPI is turned on via ethtool, so it is not specific to recent changes. Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so the bits stay off across resets. UMAC and TBUF setup is left alone so TX-side EEE keeps working.
CVE-2026-64102CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency.
CVE-2026-98365CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access mr_check_range() validates that [iova, iova+length) falls within the registered MR range using wraparound-prone arithmetic: if (iova < mr->ibmr.iova || iova + length > mr->ibmr.iova + mr->ibmr.length) A remote peer can craft an RDMA-Write/Read RETH so that iova + length wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the check. rxe_mr_iova_to_index() then computes a huge index (int idx, only guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences mr->page_info[huge], causing an out-of-bounds read/write and a kernel oops that is triggerable by an unauthenticated remote peer. Rewrite the check in overflow-safe form; the first two clauses guarantee that the subsequent subtractions do not underflow: if (iova < mr->ibmr.iova || length > mr->ibmr.length || iova - mr->ibmr.iova > mr->ibmr.length - length) With the fix, mr_check_range() returns -EINVAL for the crafted iova and the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB.

References

Track CVEs across your fleet automatically

Defensia scans your Linux servers and tells you exactly which ones are running vulnerable versions — including CVE-2026-98980. Free for 1 server.

Get started free