high CVSS 7.8 EPSS 0.12%

CVE-2026-98228·Kernel vulnerability

In the Linux kernel, the following vulnerability has been resolved: mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ On I6500 CPU cores, lld and scd give no ordering guarantees (same as all other instructions). To respect the assumption that arch_cmpxchg() is fully ordered, we must inject sync instructions above and below our lld/scd loops using the already in place WEAK_REORDERING_BEYOND_LLSC infrastructure. Otherwise, bad things can happen: [ 34.054496] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000000, epc == a80000080838e01c, ra == a80000080838dfc4 [ 34.054559] Oops[#1]: [ 34.069561] CPU: 3 UID: 0 PID: 170 Comm: pipe_race Not tainted 7.2.0-rc6-01553-gb73c35220968-dirty #103 VOLUNTARY [ 34.079932] Hardware name: Mobile EyeQ5 MP5 Evaluation board [ 34.085592] $ 0 : 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 34.093616] $ 4 : a800000808ee2618 000000000b7a879d 0000000000001000 0000000000000000 [ 34.101638] $ 8 : 0000000000e3f2c9 0000000000000000 a800000808a2a9f8 0000000000000000 [ 34.109660] $12 : a8000008139ffcd8 ffffffff84080018 a80000080837fae0 7878787878787878 [ 34.117682] $16 : a800000807e82940 0000000000001000 0000000000000000 0000000000000000 [ 34.125704] $20 : a800000802920e00 a8000008139ffdf8 a800000802649400 0000000000e3f2c9 [ 34.133726] $24 : 0000000000000006 00000001200406e0 [ 34.141783] $28 : a8000008139fc000 a8000008139ffd10 0000000000e3f2c8 a80000080838dfc4 [ 34.149837] epc : a80000080838e01c anon_pipe_read+0xd4/0x428 [ 34.155697] ra : a80000080838dfc4 anon_pipe_read+0x7c/0x428 [ 34.161549] Status: 140000e3 KX SX UX KERNEL EXL IE [ 34.166551] Cause : 40800408 (ExcCode 02) [ 34.170574] BadVA : 0000000000000000 [ 34.174161] PrId : 0001b028 (MIPS I6500) [ 34.178183] Process pipe_race (pid: 170, threadinfo=000000005ca35720, task=00000000e1013890, tls=000000014ebbb780) [ 34.188568] Stack : a800000802649400 0000000000000000 0000000000000000 a8000008139ffdd0 [ 34.196623] 0000000000000fba a800000808ee0000 0000000000000001 a8000008130c3e80 [ 34.204676] a8000008080d1280 a8000008139ffd58 a8000008139ffd58 1dbd2b22ea1dd500 [ 34.212729] a800000802649400 a800000808ee0000 ffffffffffffffea 0000000000000001 [ 34.220783] 0000000000001000 0000000000000000 00000001200ae518 ffffffffffffffff [ 34.228836] 000000fffbe0e530 a80000080837edf4 000000fffbe0e530 0000000000000000 [ 34.236890] 0000000000000000 0000000000000000 000000014ebb55a0 0000000000001000 [ 34.244943] 0000000000000001 a800000802649400 0000000000000000 0000000000000000 [ 34.252996] 0000000000000000 0000400400000000 0000000000000000 1dbd2b22ea1dd500 [ 34.261049] 00000000140000e3 a800000802649400 a800000802649400 a800000808ee0000 [ 34.269103] ... [ 34.271568] Call Trace: [ 34.274026] [<a80000080838e01c>] anon_pipe_read+0xd4/0x428 [ 34.279533] [<a80000080837edf4>] vfs_read+0x25c/0x318 [ 34.284607] [<a80000080837faac>] ksys_read+0x104/0x138 [ 34.289763] [<a80000080802b9cc>] syscall_common+0x44/0x68 [ 34.295187] [ 34.296689] Code: f84000cf 02209825 de020010 <dc420000> d8400004 02002825 0040f809 02802025 f84000c3 [ 34.306504] [ 34.308099] ---[ end trace 0000000000000000 ]--- My initial reproducer was the xdp-tools test suite. A standalone reproducer would be an lld/scd loop that, when the read is reordered by the CPU, triggers a fault. We can achieve this from userspace by stressing an anonymous pipe, which uses a mutex. Program used: // SPDX-License-Identifier: GPL-2.0 // pipe_race.c - reproducer for MIPS LL/SC reordering vs fs/pipe.c // // Two userspace processes on an anonymous pipe: // parent = writer: tight write() loop // child = reader: tight read() loop #define _GNU_SOURCE #include <assert.h> #include <errno.h> #include <sched.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include ---truncated---

Severity
high
Software
Kernel
Fixed in
7.2.8, 7.3
Published

How likely is exploitation

FIRST's Exploit Prediction Scoring System puts the probability of this CVE being exploited in the next 30 days at 0.12% — higher than 2% of all published CVEs. EPSS is an independent forecast of exploitation, not a severity rating: it says nothing about how much damage a successful attack does, which is what a CVSS score measures.

Read the two together. CVE-2026-98228 scores 7.8 on CVSS, so a successful attack would be serious — but at 0.12%, almost nobody is currently attempting it. That is a different situation from a flaw under mass exploitation, and it is usually the difference between patching on your next maintenance window and patching tonight.

How to fix this CVE

This vulnerability affects MIPS I6500 CPU cores where load-linked/store-conditional (LL/SC) instructions lack proper memory ordering guarantees, potentially causing data corruption in kernel synchronization primitives like mutexes. Systems running vulnerable kernel versions must upgrade to 7.2.8 or later (or 7.3+ for mainline users) to enable the CONFIG_WEAK_REORDERING_BEYOND_LLSC infrastructure, which injects necessary synchronization barriers. Check your distribution's kernel package updates and apply the patched version immediately, as this can lead to kernel panics and memory corruption under concurrent load.

sudo dnf update kernel

Defensia detects this vulnerability

How to check if you are affected

  1. Check your kernel version: uname -r — if it reports 7.2.7 or earlier, or any version between 7.2.0 and 7.2.7, your system may be vulnerable
  2. Verify if your CPU is MIPS I6500: grep -i 'cpu model' /proc/cpuinfo — this vulnerability only affects MIPS I6500 cores used in Mobile EyeQ5 platforms
  3. Search kernel logs for the specific panic pattern: grep -i 'Unable to handle kernel paging request' /var/log/kern.log* — look for crashes in anon_pipe_read or mutex-related code paths
  4. After patching, confirm the fix: uname -r should show 7.2.8 or later; verify with grep CONFIG_WEAK_REORDERING_BEYOND_LLSC /boot/config-$(uname -r) — it should be set to 'y' for EYEQ platforms

FAQ

What is CVE-2026-98228?

A memory ordering vulnerability in the Linux kernel affecting MIPS I6500 processors where LL/SC synchronization instructions lack the guarantees needed for safe atomic operations, allowing CPU instruction reordering to corrupt kernel data structures like mutexes. This leads to kernel panics, page faults, and system crashes under concurrent access patterns such as pipe I/O operations.

Is CVE-2026-98228 being actively exploited?

No, this vulnerability is not listed on the CISA Known Exploited Vulnerabilities (KEV) catalog and no public exploits are currently available. However, it can be triggered through stress testing normal kernel operations like pipe read/write, making it a practical threat in production environments.

What versions of Kernel are affected by CVE-2026-98228?

All MIPS I6500-based kernel versions from 7.2.0 through 7.2.7 are vulnerable. The fix was backported to stable branch 7.2.8 and is available in mainline kernel 7.3 and later.

How do I check if my server is vulnerable to CVE-2026-98228?

Run uname -r to get your kernel version; if it shows 7.2.0–7.2.7, check grep -i 'I6500' /proc/cpuinfo — only MIPS I6500 systems are vulnerable. Then cross-reference your kernel version against the patched versions (7.2.8+, 7.3+).

Does Defensia detect CVE-2026-98228?

Yes — Defensia's CVE advisory scanner compares installed kernel versions against the NVD database. If the Linux kernel is installed on a monitored MIPS-based server, CVE-2026-98228 will appear in your dashboard with remediation steps and applicable patches for your distribution.

Related Kernel CVEs

CVE-2026-63795CVSS 10In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request.
CVE-2026-64102CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency.
CVE-2026-64125CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: keep RBUF EEE/PM disabled Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX path on GENET hardware once MAC EEE becomes active. RX traffic stops flowing while the link stays up and the usual descriptor/RX error counters remain quiet. In that state the MAC still accepts frames (rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to DMA, so rx_packets is no longer incremented at the netdev level. On some boards the corruption ends up as a paging fault in skb_release_data via bcmgenet_rx_poll on an LPI exit. Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian Fainelli on an internal Broadcom 4908-family board with the same crash signature. RBUF_PM_EN is not publicly documented. This shows up more often now that phy_support_eee() enables EEE by default, but it also affects older kernels as soon as TX LPI is turned on via ethtool, so it is not specific to recent changes. Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so the bits stay off across resets. UMAC and TBUF setup is left alone so TX-side EEE keeps working.
CVE-2026-64113CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: ixgbevf: fix use-after-free in VEPA multicast source pruning ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible.
CVE-2026-64136CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked() Commit 96c4af418586 ("cifs: Fix locking usage for tcon fields") refactored cifs code to change cifs_tcp_ses_lock for tc_lock around tc_count changes. There was missing lock around tc_count increment inside smb2_find_smb_sess_tcon_unlocked().

References

Track CVEs across your fleet automatically

Defensia scans your Linux servers and tells you exactly which ones are running vulnerable versions — including CVE-2026-98228. Free for 1 server.

Get started free