critical CVSS 9.8 EPSS 0.71%

CVE-2026-64268·Kernel vulnerability

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: bound Read Response placement to the RREAD length In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connected siw peer that answers an outstanding RREAD with Read Response segments that keep the DDP Last flag clear, carrying more total payload than the RREAD requested, drives wqe->processed past the validated sink buffer; the next siw_rx_data() call writes out of bounds at sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP, so the peer is the remote end of an established RDMA connection and needs no local privilege. Bound every segment before placement, exactly as siw_proc_send() and siw_proc_write() already do for their tagged and untagged paths, and terminate the connection with a base-or-bounds DDP error when the Read Response would overrun the sink buffer. This is the second receive-path length fix for this file. A separate change rejects an MPA FPDU length that underflows the per-fragment remainder in the header decode; that guard does not cover this case, because here each individual segment length is self-consistent and only the accumulated placement offset overruns the buffer.

Severity
critical
Software
Kernel
Fixed in
7.1.4
Published

How likely is exploitation

FIRST's Exploit Prediction Scoring System puts the probability of this CVE being exploited in the next 30 days at 0.71% — higher than 53% of all published CVEs. EPSS is an independent forecast of exploitation, not a severity rating: it says nothing about how much damage a successful attack does, which is what a CVSS score measures.

Read the two together. CVE-2026-64268 scores 9.8 on CVSS, so a successful attack would be serious — but at 0.71%, almost nobody is currently attempting it. That is a different situation from a flaw under mass exploitation, and it is usually the difference between patching on your next maintenance window and patching tonight.

Affected versions

From: 6.19

Until: 7.1.4

Fixed in: 7.1.4

How to fix this CVE

Update your Linux kernel to version 7.1.4 or later to fix a critical RDMA/siw buffer overflow vulnerability that allows remote attackers to write out of bounds during Read Response processing. Systems running kernel versions 6.19 through 7.1.3 should prioritize this update immediately. After patching, reboot the system to activate the fixed kernel.

sudo dnf update kernel kernel-devel && sudo reboot

Defensia detects this vulnerability

How to check if you are affected

  1. Step 1: Check your current kernel version with `uname -r` and compare against the affected range (6.19 to 7.1.3)
  2. Step 2: Verify if RDMA/siw is loaded by running `lsmod | grep siw` — if output is empty, the vulnerable component is not active
  3. Step 3: Search kernel logs for DDP (Direct Data Placement) errors using `sudo dmesg | grep -i 'ddp\|rdma\|siw'` to detect exploitation attempts
  4. Step 4: After kernel update, reboot and run `uname -r` to confirm version is 7.1.4 or higher, then verify with `modinfo siw | grep version`

FAQ

What is CVE-2026-64268?

CVE-2026-64268 is a critical buffer overflow in the Linux kernel's RDMA/siw (Software iWARP) driver that occurs when processing inbound Read Response segments without proper bounds checking, allowing a remote peer to write data past the allocated buffer.

Is CVE-2026-64268 being actively exploited?

No — this vulnerability is not currently listed in the CISA Known Exploited Vulnerabilities (KEV) catalog and no public exploits are available, though it remains critical due to its network-accessible nature.

What versions of Kernel are affected by CVE-2026-64268?

Linux kernel versions 6.19 through 7.1.3 are vulnerable; version 7.1.4 and later contain the fix.

How do I check if my server is vulnerable to CVE-2026-64268?

Run `uname -r` and check if the version falls between 6.19 and 7.1.3; additionally, confirm RDMA is in use with `lsmod | grep siw` or `lsof -i -n -P | grep -i rdma`.

Does Defensia detect CVE-2026-64268?

Yes — Defensia's CVE advisory scanner compares installed package versions against the NVD database. If the Linux kernel is installed on a monitored server running versions 6.19–7.1.3, CVE-2026-64268 will appear in your dashboard with remediation steps.

Related Kernel CVEs

CVE-2026-63795CVSS 10In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request.
CVE-2026-53260CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: tcp: Add preempt_{disable,enable}_nested() in reqsk_queue_hash_req(). syzbot reported a weird reqsk->rsk_refcnt underflow in __inet_csk_reqsk_queue_drop(). The captured reqsk_put() in __inet_csk_reqsk_queue_drop() is called only when it successfully removes reqsk from ehash. Moreover, reqsk_timer_handler() calls another reqsk_put() after that. This indicates that the reqsk was missing both refcnts for ehash and the timer itself. Since all the syzbot reports had PREEMPT_RT enabled, the only possible scenario is that reqsk_queue_hash_req() is preempted after mod_timer() and before refcount_set(), and then the timer triggered after 1s aborts the reqsk due to its listener's close(). Let's wrap mod_timer() and refcount_set() with preempt_disable_nested() and preempt_enable_nested(). Note that inet_ehash_insert() holds the normal spin_lock() (mutex in PREEMPT_RT), so it must be called outside of preempt_disable_nested(), but this is fine. The lookup path just ignores 0 sk_refcnt entries in ehash and tries to create another reqsk, but this will fail at inet_ehash_insert(). [0]: refcount_t: underflow; use-after-free. WARNING: lib/refcount.c:28 at refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28, CPU#0: ktimers/0/16 Modules linked in: CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 RIP: 0010:refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28 Code: e4 7d d1 0a 67 48 0f b9 3a eb 4a e8 38 3d 23 fd 48 8d 3d e1 7d d1 0a 67 48 0f b9 3a eb 37 e8 25 3d 23 fd 48 8d 3d de 7d d1 0a <67> 48 0f b9 3a eb 24 e8 12 3d 23 fd 48 8d 3d db 7d d1 0a 67 48 0f RSP: 0000:ffffc90000157948 EFLAGS: 00010246 RAX: ffffffff84a1301b RBX: 0000000000000003 RCX: ffff88801ca98000 RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffffffff8f72ae00 RBP: ffffffff99ae3b01 R08: ffff88801ca98000 R09: 0000000000000005 R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880425ef568 R13: ffff8880425ef4f8 R14: ffff8880425ef578 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff888126386000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7b46710e9c CR3: 000000000dbb6000 CR4: 00000000003526f0 Call Trace: <TASK> __refcount_sub_and_test include/linux/refcount.h:400 [inline] __refcount_dec_and_test include/linux/refcount.h:432 [inline] refcount_dec_and_test include/linux/refcount.h:450 [inline] reqsk_put include/net/request_sock.h:136 [inline] __inet_csk_reqsk_queue_drop+0x3ce/0x440 net/ipv4/inet_connection_sock.c:1007 reqsk_timer_handler+0x651/0xdf0 net/ipv4/inet_connection_sock.c:1137 call_timer_fn+0x192/0x5e0 kernel/time/timer.c:1748 expire_timers kernel/time/timer.c:1799 [inline] __run_timers kernel/time/timer.c:2374 [inline] __run_timer_base+0x6a3/0x9f0 kernel/time/timer.c:2386 run_timer_base kernel/time/timer.c:2395 [inline] run_timer_softirq+0x67/0x170 kernel/time/timer.c:2403 handle_softirqs+0x1de/0x6d0 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] run_ktimerd+0x69/0x100 kernel/softirq.c:1151 smpboot_thread_fn+0x541/0xa50 kernel/smpboot.c:160 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK>
CVE-2026-53399CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: nfsd: release layout stid on setlease failure nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via idr_alloc_cyclic() under cl_lock before returning to nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then fails, the error path frees the layout stateid directly with kmem_cache_free() without ever calling idr_remove(), leaving the IDR slot pointing at freed slab memory. Any subsequent IDR walker (states_show, client teardown) dereferences the dangling pointer. The correct teardown for an IDR-published stid is nfs4_put_stid(), which removes the IDR slot under cl_lock, dispatches sc_free (nfsd4_free_layout_stateid) to release ls->ls_file via nfsd4_close_layout(), and drops the nfs4_file reference in its tail. A second issue blocks that switch: nfsd4_free_layout_stateid() unconditionally inspects ls->ls_fence_work via delayed_work_pending() under ls_lock, but INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only after the setlease call. On the setlease-failure path the destructor would touch an uninitialized delayed_work. nfsd4_alloc_layout_stateid() nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */ nfsd4_layout_setlease() /* fails */ nfs4_put_stid() nfsd4_free_layout_stateid() delayed_work_pending(&ls->ls_fence_work) /* needs INIT */ nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */ put_nfs4_file() Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK initialization above the nfsd4_layout_setlease() call, and replace the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup with a single nfs4_put_stid(stp).
CVE-2026-53246CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing When a listening SCTP server processes a COOKIE_ECHO chunk, the cached peer INIT chunk embedded after the cookie is parsed and its parameters are later walked by sctp_process_init() using sctp_walk_params(). However, the chunk header length of this cached INIT chunk was not validated against the remaining buffer in the COOKIE_ECHO payload. If the length field is inflated, the parameter walk can run beyond the actual received data, leading to out-of-bounds reads and potential memory corruption during later parameter handling (e.g. STATE_COOKIE processing and kmemdup() copies). Add a bounds check in sctp_unpack_cookie() to ensure the cached INIT chunk length does not exceed the available data in the COOKIE_ECHO buffer before it is used.
CVE-2026-53215CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: refill RX buffers before XDP or skb use The RX error path returns the current descriptor buffer to the hardware BM pool. That is only valid while the driver still owns the buffer. mvpp2_rx_refill() can fail after the current buffer has been handed to XDP or attached to an skb. In those cases mvpp2_run_xdp() may have recycled, redirected, or queued the page for XDP_TX, and an skb free also retires the data buffer. Returning such a buffer to BM lets hardware DMA into memory that is no longer owned by the RX ring. Refill the BM pool before handing the current buffer to XDP or to the skb. If the allocation fails there, drop the packet and return the still-owned current buffer to BM, preserving the pool depth. Once the refill succeeds, later local drops retire/free the current buffer instead of returning it to BM.

References

Track CVEs across your fleet automatically

Defensia scans your Linux servers and tells you exactly which ones are running vulnerable versions — including CVE-2026-64268. Free for 1 server.

Get started free