high CVSS 7.8 EPSS 0.12%

CVE-2026-52935·Kernel vulnerability

In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: do not reuse an in-progress partial send espintcp keeps a single in-flight transmit in ctx->partial. Before building a new sk_msg, espintcp_sendmsg() first tries to flush that state through espintcp_push_msgs(). For blocking callers, espintcp_push_msgs() may return success even when the previous partial send is still pending. espintcp_sendmsg() would then reinitialize emsg->skmsg and reuse ctx->partial while the old transfer still owns that state. Do not rebuild the send message when ctx->partial is still in progress. If espintcp_push_msgs() returns with emsg->len still set, fail the new send instead of overwriting the live partial state. This is a memory-safety fix: reusing the live partial-send state can leave a stale offset attached to a new sk_msg and lead to an out-of- bounds read in the send path. tcp_sendmsg_locked() already handles waiting for send buffer memory, so the fix here is just to preserve espintcp's one-message-at-a-time transmit state.

Severity
high
Software
Kernel
Fixed in
7.0.13
Published

How likely is exploitation

FIRST's Exploit Prediction Scoring System puts the probability of this CVE being exploited in the next 30 days at 0.12% — higher than 2% of all published CVEs. EPSS is an independent forecast of exploitation, not a severity rating: it says nothing about how much damage a successful attack does, which is what a CVSS score measures.

Read the two together. CVE-2026-52935 scores 7.8 on CVSS, so a successful attack would be serious — but at 0.12%, almost nobody is currently attempting it. That is a different situation from a flaw under mass exploitation, and it is usually the difference between patching on your next maintenance window and patching tonight.

Affected versions

From: 6.19

Until: 7.0.13

Fixed in: 7.0.13

How to fix this CVE

Update your Linux kernel to version 7.0.13 or later to address a critical memory-safety issue in the xfrm espintcp subsystem. The vulnerability allows reuse of an in-progress partial send buffer, which can lead to out-of-bounds memory reads during packet transmission. Systems running kernel versions 6.19 through 7.0.12 should prioritize this update, particularly those using IPSec over TCP for encrypted communications.

sudo dnf update kernel kernel-devel && sudo reboot

Defensia detects this vulnerability

How to check if you are affected

  1. Check installed kernel version: uname -r
  2. Verify if xfrm and espintcp are in use: grep -i esp /proc/net/xfrm_stat or ps aux | grep -i esp
  3. Monitor kernel logs for memory access violations: sudo journalctl -k | grep -i 'BUG\|OOPS\|segfault'
  4. Confirm fix by verifying kernel version is 7.0.13 or higher: uname -r | awk -F. '{if ($1>7 || ($1==7 && $2>=1) || ($1==7 && $2==0 && $3>=13)) print "Patched"; else print "Vulnerable"}'

FAQ

What is CVE-2026-52935?

This is a kernel memory-safety vulnerability in the xfrm espintcp subsystem where an incomplete packet transmission buffer could be incorrectly reused for a new send operation, causing stale memory offsets to be attached to new socket messages. This results in out-of-bounds reads that can crash the kernel or leak sensitive data.

Is CVE-2026-52935 being actively exploited?

No, this vulnerability is not listed in the CISA Known Exploited Vulnerabilities (KEV) catalog and no public exploits have been released. However, the memory-safety nature of the flaw warrants prompt patching.

What versions of Kernel are affected by CVE-2026-52935?

Linux kernel versions 6.19 through 7.0.12 are vulnerable. Version 7.0.13 and later contain the fix.

How do I check if my server is vulnerable to CVE-2026-52935?

Run `uname -r` to display your kernel version. If the output shows 6.19.x through 7.0.12, your system is vulnerable and requires immediate kernel update.

Does Defensia detect CVE-2026-52935?

Yes — Defensia's CVE advisory scanner compares installed package versions against the NVD database. If Kernel is installed on a monitored server, CVE-2026-52935 will appear in your dashboard with remediation steps.

Related Kernel CVEs

CVE-2026-63795CVSS 10In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request.
CVE-2026-98432CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: ipv4: free inet_opt and ireq_opt after an RCU grace period tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the child socket (newinet->inet_opt) without copying it. Another cpu can concurrently process a retransmitted SYN for the same request socket, and send a SYNACK from tcp_check_req(). tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt under rcu_read_lock() only, and ip_build_and_send_pkt() and ip_options_build() then read opt->optlen twice. Note that the SYNACK timer itself is not an issue: it holds a reference on its request socket, and inet_csk_reqsk_queue_drop() calls timer_delete_sync() before the child can be freed. Since commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table"), request sockets are processed without holding the listener lock, so nothing prevents the child socket from being freed while the SYNACK is still being built. TCP child sockets do not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt with a plain kfree(), leading to a use-after-free in ip_options_build(). A similar issue exists with request socket migration (net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE program). reqsk_timer_handler() clones the request socket with inet_reqsk_clone(), so that the old request socket and its clone share the same ireq_opt, then reqsk_migrate_reset() clears the pointer in the old one. Another cpu holding a reference on the old request socket can still be using these options (sending a SYNACK, or creating a child in tcp_v4_syn_recv_sock()) when the clone is freed, and tcp_v4_reqsk_destructor() also uses a plain kfree(). Readers already use RCU, and other paths replacing inet_opt (do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and tcp_v4_reqsk_destructor() as well. IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock() duplicates the options. tcp_v6_reqsk_destructor() has the same migration issue with ipv6_opt, which is only set by CALIPSO. This will be addressed in a separate patch.
CVE-2026-64113CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: ixgbevf: fix use-after-free in VEPA multicast source pruning ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible.
CVE-2026-64102CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency.
CVE-2026-64125CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: keep RBUF EEE/PM disabled Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX path on GENET hardware once MAC EEE becomes active. RX traffic stops flowing while the link stays up and the usual descriptor/RX error counters remain quiet. In that state the MAC still accepts frames (rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to DMA, so rx_packets is no longer incremented at the netdev level. On some boards the corruption ends up as a paging fault in skb_release_data via bcmgenet_rx_poll on an LPI exit. Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian Fainelli on an internal Broadcom 4908-family board with the same crash signature. RBUF_PM_EN is not publicly documented. This shows up more often now that phy_support_eee() enables EEE by default, but it also affects older kernels as soon as TX LPI is turned on via ethtool, so it is not specific to recent changes. Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so the bits stay off across resets. UMAC and TBUF setup is left alone so TX-side EEE keeps working.

References

Track CVEs across your fleet automatically

Defensia scans your Linux servers and tells you exactly which ones are running vulnerable versions — including CVE-2026-52935. Free for 1 server.

Get started free