high CVSS 7.8 EPSS 0.16%

CVE-2026-45861·Kernel vulnerability

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in qd_put Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously") started freeing quota data objects during filesystem shutdown instead of putting them back onto the LRU list, but it failed to remove these objects from the LRU list, causing LRU list corruption. This caused use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access already-freed objects on the LRU list. Fix this by removing qd objects from the LRU list before freeing them in qd_put(). Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>.

Severity
high
Software
Kernel
Fixed in
6.19.4
Published

How likely is exploitation

FIRST's Exploit Prediction Scoring System puts the probability of this CVE being exploited in the next 30 days at 0.16% — higher than 5% of all published CVEs. EPSS is an independent forecast of exploitation, not a severity rating: it says nothing about how much damage a successful attack does, which is what a CVSS score measures.

Read the two together. CVE-2026-45861 scores 7.8 on CVSS, so a successful attack would be serious — but at 0.16%, almost nobody is currently attempting it. That is a different situation from a flaw under mass exploitation, and it is usually the difference between patching on your next maintenance window and patching tonight.

Affected versions

From: 6.19

Until: 6.19.4

Fixed in: 6.19.4

How to fix this CVE

Update your Linux kernel to version 6.19.4 or later to patch a use-after-free vulnerability in the GFS2 quota data handling subsystem. This flaw could allow local attackers with standard privileges to trigger memory corruption through the kernel's memory shrinking mechanism. Apply the patch immediately to all systems running GFS2 filesystems on affected kernel versions.

sudo dnf update kernel kernel-devel

Defensia detects this vulnerability

How to check if you are affected

  1. Check installed kernel version: uname -r — compare output against 6.19.4; versions 6.19.0 through 6.19.3 are vulnerable
  2. Verify GFS2 is in use: grep -i gfs2 /etc/fstab or mount | grep gfs2 — if no output, system is not at risk
  3. Search kernel logs for GFS2 quota shrink errors: dmesg | grep -i 'gfs2.*shrink\|use.after.free\|slab'
  4. Confirm patch installation: uname -r should show version 6.19.4 or higher after reboot

FAQ

What is CVE-2026-45861?

This vulnerability affects the GFS2 shared filesystem driver in the Linux kernel. During filesystem shutdown, quota data objects were freed from memory but not properly removed from the kernel's LRU (Least Recently Used) cache list, creating a use-after-free condition when the memory shrinker later tried to access these already-freed objects.

Is CVE-2026-45861 being actively exploited?

No, CVE-2026-45861 is not listed in CISA's Known Exploited Vulnerabilities catalog, and no public exploits are currently available. However, the vulnerability poses a local privilege escalation risk and should still be prioritized for patching.

What versions of Kernel are affected by CVE-2026-45861?

Linux kernel versions 6.19.0 through 6.19.3 are vulnerable. Version 6.19.4 and all later releases contain the fix.

How do I check if my server is vulnerable to CVE-2026-45861?

Run 'uname -r' to display your kernel version. If the output shows 6.19.0, 6.19.1, 6.19.2, or 6.19.3, and GFS2 is mounted (verify with 'mount | grep gfs2'), your system is vulnerable.

Does Defensia detect CVE-2026-45861?

Yes — Defensia's CVE advisory scanner compares installed package versions against the NVD database. If the Linux kernel is installed on a monitored server, CVE-2026-45861 will appear in your dashboard with remediation steps.

Related Kernel CVEs

CVE-2026-63795CVSS 10In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request.
CVE-2026-64113CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: ixgbevf: fix use-after-free in VEPA multicast source pruning ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible.
CVE-2026-64125CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: keep RBUF EEE/PM disabled Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX path on GENET hardware once MAC EEE becomes active. RX traffic stops flowing while the link stays up and the usual descriptor/RX error counters remain quiet. In that state the MAC still accepts frames (rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to DMA, so rx_packets is no longer incremented at the netdev level. On some boards the corruption ends up as a paging fault in skb_release_data via bcmgenet_rx_poll on an LPI exit. Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian Fainelli on an internal Broadcom 4908-family board with the same crash signature. RBUF_PM_EN is not publicly documented. This shows up more often now that phy_support_eee() enables EEE by default, but it also affects older kernels as soon as TX LPI is turned on via ethtool, so it is not specific to recent changes. Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so the bits stay off across resets. UMAC and TBUF setup is left alone so TX-side EEE keeps working.
CVE-2026-64102CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency.
CVE-2026-98365CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access mr_check_range() validates that [iova, iova+length) falls within the registered MR range using wraparound-prone arithmetic: if (iova < mr->ibmr.iova || iova + length > mr->ibmr.iova + mr->ibmr.length) A remote peer can craft an RDMA-Write/Read RETH so that iova + length wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the check. rxe_mr_iova_to_index() then computes a huge index (int idx, only guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences mr->page_info[huge], causing an out-of-bounds read/write and a kernel oops that is triggerable by an unauthenticated remote peer. Rewrite the check in overflow-safe form; the first two clauses guarantee that the subsequent subtractions do not underflow: if (iova < mr->ibmr.iova || length > mr->ibmr.length || iova - mr->ibmr.iova > mr->ibmr.length - length) With the fix, mr_check_range() returns -EINVAL for the crafted iova and the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB.

References

Track CVEs across your fleet automatically

Defensia scans your Linux servers and tells you exactly which ones are running vulnerable versions — including CVE-2026-45861. Free for 1 server.

Get started free