high CVSS 7.8 EPSS 0.13%

CVE-2026-43368·Kernel vulnerability

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential overflow of shmem scatterlist length When a scatterlists table of a GEM shmem object of size 4 GB or more is populated with pages allocated from a folio, unsigned int .length attribute of a scatterlist may get overflowed if total byte length of pages allocated to that single scatterlist happens to reach or cross the 4GB limit. As a consequence, users of the object may suffer from hitting unexpected, premature end of the object's backing pages. [278.780187] ------------[ cut here ]------------ [278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915] ... [278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary) [278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER [278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 [278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915] ... [278.780786] Call Trace: [278.780787] <TASK> [278.780788] ? __apply_to_page_range+0x3e6/0x910 [278.780795] ? __pfx_remap_sg+0x10/0x10 [i915] [278.780906] apply_to_page_range+0x14/0x30 [278.780908] remap_io_sg+0x14d/0x260 [i915] [278.781013] vm_fault_cpu+0xd2/0x330 [i915] [278.781137] __do_fault+0x3a/0x1b0 [278.781140] do_fault+0x322/0x640 [278.781143] __handle_mm_fault+0x938/0xfd0 [278.781150] handle_mm_fault+0x12c/0x300 [278.781152] ? lock_mm_and_find_vma+0x4b/0x760 [278.781155] do_user_addr_fault+0x2d6/0x8e0 [278.781160] exc_page_fault+0x96/0x2c0 [278.781165] asm_exc_page_fault+0x27/0x30 ... That issue was apprehended by the author of a change that introduced it, and potential risk even annotated with a comment, but then never addressed. When adding folio pages to a scatterlist table, take care of byte length of any single scatterlist not exceeding max_segment. (cherry picked from commit 06249b4e691a75694c014a61708c007fb5755f60)

Severity
high
Software
Kernel
Fixed in
6.19.9
Published

How likely is exploitation

FIRST's Exploit Prediction Scoring System puts the probability of this CVE being exploited in the next 30 days at 0.13% — higher than 2% of all published CVEs. EPSS is an independent forecast of exploitation, not a severity rating: it says nothing about how much damage a successful attack does, which is what a CVSS score measures.

Read the two together. CVE-2026-43368 scores 7.8 on CVSS, so a successful attack would be serious — but at 0.13%, almost nobody is currently attempting it. That is a different situation from a flaw under mass exploitation, and it is usually the difference between patching on your next maintenance window and patching tonight.

Affected versions

From: 6.19

Until: 6.19.9

Fixed in: 6.19.9

How to fix this CVE

Update your Linux kernel to version 6.19.9 or later to patch the scatterlist overflow vulnerability affecting the i915 GPU driver. This fix ensures that memory page allocations for large GEM shmem objects (4GB+) are properly segmented to prevent integer overflow in scatterlist length fields. Apply the kernel update through your distribution's package manager and reboot your system to activate the patch.

sudo dnf update kernel

Defensia detects this vulnerability

How to check if you are affected

  1. Step 1: Check your current kernel version with `uname -r` and verify if it falls in the 6.19.0-6.19.8 range
  2. Step 2: Verify i915 GPU driver is loaded by running `lsmod | grep i915` (affects Intel integrated/discrete GPUs)
  3. Step 3: Search kernel logs for scatterlist-related warnings with `sudo dmesg | grep -i 'scatterlist\|remap_sg\|overflow'`
  4. Step 4: After updating, confirm the new kernel version with `uname -r` and verify it shows 6.19.9 or later

FAQ

What is CVE-2026-43368?

This vulnerability affects the i915 Intel GPU driver's handling of very large (4GB+) GPU memory objects, where an unsigned integer overflow in scatterlist page length tracking can cause premature termination of memory access, leading to system instability or denial of service.

Is CVE-2026-43368 being actively exploited?

No, this vulnerability is not currently listed on CISA's Known Exploited Vulnerabilities (KEV) catalog and no public exploits are available, though the risk has been documented by kernel developers.

What versions of Kernel are affected by CVE-2026-43368?

Linux kernel versions 6.19.0 through 6.19.8 are affected. The vulnerability was fixed in kernel 6.19.9 and later versions.

How do I check if my server is vulnerable to CVE-2026-43368?

Run `uname -r` to display your kernel version. If it shows 6.19.0 through 6.19.8 and `lsmod | grep i915` returns output, your system is vulnerable. Run `sudo dmesg | tail -100` to check for any existing scatterlist-related kernel warnings.

Does Defensia detect CVE-2026-43368?

Yes — Defensia's CVE advisory scanner compares installed package versions against the NVD database. If Kernel is installed on a monitored server, CVE-2026-43368 will appear in your dashboard with remediation steps.

Related Kernel CVEs

CVE-2026-63795CVSS 10In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request.
CVE-2026-64232CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: block: recompute nr_integrity_segments in blk_insert_cloned_request blk_insert_cloned_request() already recomputes nr_phys_segments against the bottom queue, because "the queue settings related to segment counting may differ from the original queue." The exact same reasoning applies to integrity segments: a stacked driver's underlying queue can have tighter virt_boundary_mask, seg_boundary_mask, or max_segment_size than the top queue, in which case blk_rq_count_integrity_sg() against the bottom queue produces a different count than the cached rq->nr_integrity_segments inherited from the source request by blk_rq_prep_clone(). When the cached count is lower than the bottom queue's actual count, blk_rq_map_integrity_sg() trips BUG_ON(segments > rq->nr_integrity_segments); on dispatch. The same families of stacked setups that motivated the existing nr_phys_segments recompute -- dm-multipath fanning out to nvme-rdma in particular -- can produce this. Mirror the nr_phys_segments handling: when the request carries integrity, recompute nr_integrity_segments against the bottom queue and reject the request if it exceeds the bottom queue's max_integrity_segments. blk_rq_count_integrity_sg() and queue_max_integrity_segments() are both already available via <linux/blk-integrity.h>, which blk-mq.c includes. This closes a latent gap in the stacking contract and brings the integrity-segment accounting in line with the existing phys-segment accounting.
CVE-2026-64113CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: ixgbevf: fix use-after-free in VEPA multicast source pruning ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible.
CVE-2026-52982CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit() syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit() when accessing skb->len for tx statistics after usb_submit_urb() has been called: BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760 drivers/net/usb/rtl8150.c:712 Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226 The URB completion handler write_bulk_callback() frees the skb via dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU in softirq context before usb_submit_urb() returns in the submitter, so by the time the submitter reads skb->len the skb has already been queued to the per-CPU completion_queue and freed by net_tx_action(): CPU A (xmit) CPU B (USB completion softirq) ------------ ------------------------------ dev->tx_skb = skb; usb_submit_urb() --+ |-------> write_bulk_callback() | dev_kfree_skb_irq(dev->tx_skb) | net_tx_action() | napi_skb_cache_put() <-- free netdev->stats.tx_bytes | += skb->len; <-- UAF read Fix it by caching skb->len before submitting the URB and using the cached value when updating the tx_bytes counter. The pre-existing tx_bytes semantics are preserved: the counter tracks the original frame length (skb->len), not the ETH_ZLEN/USB-alignment padded "count" value that is handed to the device. Changing that would be a user-visible accounting change and is out of scope for this UAF fix.
CVE-2026-52993CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: tipc: fix double-free in tipc_buf_append() tipc_msg_validate() can potentially reallocate the skb it is validating, freeing the old one. In tipc_buf_append(), it was being called with a pointer to a local variable which was a copy of the caller's skb pointer. If the skb was reallocated and validation subsequently failed, the error handling path would free the original skb pointer, which had already been freed, leading to double-free. Fix this by checking if head now points to a newly allocated reassembled skb. If it does, reassign *headbuf for later freeing operations.

References

Track CVEs across your fleet automatically

Defensia scans your Linux servers and tells you exactly which ones are running vulnerable versions — including CVE-2026-43368. Free for 1 server.

Get started free