medium CVSS 5.5 EPSS 0.13%

CVE-2025-71285·Kernel vulnerability

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels MHI stack offers the 'auto_queue' feature, which allows the MHI stack to auto queue the buffers for the RX path (DL channel). Though this feature simplifies the client driver design, it introduces race between the client drivers and the MHI stack. For instance, with auto_queue, the 'dl_callback' for the DL channel may get called before the client driver is fully probed. This means, by the time the dl_callback gets called, the client driver's structures might not be initialized, leading to NULL ptr dereference. Currently, the drivers have to workaround this issue by initializing the internal structures before calling mhi_prepare_for_transfer_autoqueue(). But even so, there is a chance that the client driver's internal code path may call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() is called, leading to similar NULL ptr dereference. This issue has been reported on the Qcom X1E80100 CRD machines affecting boot. So to properly fix all these races, drop the MHI 'auto_queue' feature altogether and let the client driver (QRTR) manage the RX buffers manually. In the QRTR driver, queue the RX buffers based on the ring length during probe and recycle the buffers in 'dl_callback' once they are consumed. This also warrants removing the setting of 'auto_queue' flag from controller drivers. Currently, this 'auto_queue' feature is only enabled for IPCR DL channel. So only the QRTR client driver requires the modification.

Severity
medium
Software
Kernel
Fixed in
6.19.6
Published

How likely is exploitation

FIRST's Exploit Prediction Scoring System puts the probability of this CVE being exploited in the next 30 days at 0.13% — higher than 2% of all published CVEs. EPSS is an independent forecast of exploitation, not a severity rating: it says nothing about how much damage a successful attack does, which is what a CVSS score measures.

Affected versions

From: 6.19

Until: 6.19.6

Fixed in: 6.19.6

How to fix this CVE

Update your Linux kernel to version 6.19.6 or later to resolve this race condition vulnerability in the QRTR driver's MHI auto_queue feature. The vulnerability could cause NULL pointer dereference during system boot on affected hardware platforms. Applying this patch eliminates unsafe buffer management races by requiring explicit RX buffer management instead of automatic queuing.

sudo dnf update kernel kernel-devel

Defensia detects this vulnerability

How to check if you are affected

  1. Run 'uname -r' to check your current kernel version; if it shows 6.19.0 through 6.19.5, your system is vulnerable
  2. Verify if QRTR and MHI modules are loaded by running 'lsmod | grep -E "(qrtr|mhi)"'
  3. Check kernel logs for MHI-related errors with 'dmesg | grep -i mhi' or 'journalctl -k | grep -i mhi' to identify any initialization race conditions
  4. After patching, confirm the new kernel version with 'uname -r' and verify it shows 6.19.6 or later; reboot if necessary to activate the patched kernel

FAQ

What is CVE-2025-71285?

This CVE addresses a race condition in the Linux kernel's QRTR driver where the MHI auto_queue feature could trigger callbacks before driver initialization completes, resulting in NULL pointer dereference crashes during boot on Qualcomm X1E80100 systems.

Is CVE-2025-71285 being actively exploited?

No, this vulnerability is not actively exploited in the wild and does not appear on the CISA Known Exploited Vulnerabilities list. No public exploits are currently available.

What versions of Kernel are affected by CVE-2025-71285?

Linux kernel versions 6.19 through 6.19.5 are vulnerable; the fix is included in version 6.19.6 and later.

How do I check if my server is vulnerable to CVE-2025-71285?

Execute 'uname -r' to display your kernel version; if it falls within 6.19.0 to 6.19.5 and you have QRTR networking components, your system is affected.

Does Defensia detect CVE-2025-71285?

Yes — Defensia's CVE advisory scanner compares installed package versions against the NVD database. If Kernel is installed on a monitored server, CVE-2025-71285 will appear in your dashboard with remediation steps.

Related Kernel CVEs

CVE-2026-63795CVSS 10In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request.
CVE-2026-98365CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access mr_check_range() validates that [iova, iova+length) falls within the registered MR range using wraparound-prone arithmetic: if (iova < mr->ibmr.iova || iova + length > mr->ibmr.iova + mr->ibmr.length) A remote peer can craft an RDMA-Write/Read RETH so that iova + length wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the check. rxe_mr_iova_to_index() then computes a huge index (int idx, only guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences mr->page_info[huge], causing an out-of-bounds read/write and a kernel oops that is triggerable by an unauthenticated remote peer. Rewrite the check in overflow-safe form; the first two clauses guarantee that the subsequent subtractions do not underflow: if (iova < mr->ibmr.iova || length > mr->ibmr.length || iova - mr->ibmr.iova > mr->ibmr.length - length) With the fix, mr_check_range() returns -EINVAL for the crafted iova and the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB.
CVE-2026-98432CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: ipv4: free inet_opt and ireq_opt after an RCU grace period tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the child socket (newinet->inet_opt) without copying it. Another cpu can concurrently process a retransmitted SYN for the same request socket, and send a SYNACK from tcp_check_req(). tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt under rcu_read_lock() only, and ip_build_and_send_pkt() and ip_options_build() then read opt->optlen twice. Note that the SYNACK timer itself is not an issue: it holds a reference on its request socket, and inet_csk_reqsk_queue_drop() calls timer_delete_sync() before the child can be freed. Since commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table"), request sockets are processed without holding the listener lock, so nothing prevents the child socket from being freed while the SYNACK is still being built. TCP child sockets do not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt with a plain kfree(), leading to a use-after-free in ip_options_build(). A similar issue exists with request socket migration (net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE program). reqsk_timer_handler() clones the request socket with inet_reqsk_clone(), so that the old request socket and its clone share the same ireq_opt, then reqsk_migrate_reset() clears the pointer in the old one. Another cpu holding a reference on the old request socket can still be using these options (sending a SYNACK, or creating a child in tcp_v4_syn_recv_sock()) when the clone is freed, and tcp_v4_reqsk_destructor() also uses a plain kfree(). Readers already use RCU, and other paths replacing inet_opt (do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and tcp_v4_reqsk_destructor() as well. IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock() duplicates the options. tcp_v6_reqsk_destructor() has the same migration issue with ipv6_opt, which is only set by CALIPSO. This will be addressed in a separate patch.
CVE-2026-64136CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked() Commit 96c4af418586 ("cifs: Fix locking usage for tcon fields") refactored cifs code to change cifs_tcp_ses_lock for tc_lock around tc_count changes. There was missing lock around tc_count increment inside smb2_find_smb_sess_tcon_unlocked().
CVE-2026-64160CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential for tearing in ->remote_i_size and ->zero_point Fix potential tearing in using ->remote_i_size and ->zero_point by copying i_size_read() and i_size_write() and using the same seqcount as for i_size. We need to make sure that netfslib and the filesystems that use it always hold i_lock whilst updating any of the sizes to prevent i_size_seqcount from getting corrupted.

References

Track CVEs across your fleet automatically

Defensia scans your Linux servers and tells you exactly which ones are running vulnerable versions — including CVE-2025-71285. Free for 1 server.

Get started free