high CVSS 7.8

CVE-2022-49464·Kernel vulnerability

In the Linux kernel, the following vulnerability has been resolved: erofs: fix buffer copy overflow of ztailpacking feature I got some KASAN report as below: [ 46.959738] ================================================================== [ 46.960430] BUG: KASAN: use-after-free in z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] Read of size 4074 at addr ffff8880300c2f8e by task fssum/188 ... [ 46.960430] Call Trace: [ 46.960430] <TASK> [ 46.960430] dump_stack_lvl+0x41/0x5e [ 46.960430] print_report.cold+0xb2/0x6b7 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_report+0x8a/0x140 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_check_range+0x14d/0x1d0 [ 46.960430] memcpy+0x20/0x60 [ 46.960430] z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] z_erofs_decompress_pcluster+0xaae/0x1080 The root cause is that the tail pcluster won't be a complete filesystem block anymore. So if ztailpacking is used, the second part of an uncompressed tail pcluster may not be ``rq->pageofs_out``.

Severity: high
Software: Kernel
Fixed in: 5.18.3
Published: 2025-02-26

Affected versions

From: 5.18

Until: 5.18.3

Fixed in: 5.18.3

How to fix this CVE

Update your Linux kernel to version 5.18.3 or later to address a buffer overflow vulnerability in the EROFS ztailpacking feature that can cause use-after-free memory access. Systems running kernel versions 5.18 through 5.18.2 should prioritize this update as the vulnerability affects compressed filesystem operations and can lead to memory corruption.

sudo dnf update kernel kernel-devel

Defensia detects this vulnerability

How to check if you are affected

Step 1: Check kernel version with `uname -r` — vulnerable if output shows 5.18.0, 5.18.1, or 5.18.2
Step 2: Verify EROFS support is enabled with `grep CONFIG_EROFS /boot/config-$(uname -r)` — if returns y or m, the module is active
Step 3: Check system logs for KASAN memory safety warnings using `dmesg | grep -i 'KASAN\|use-after-free\|z_erofs'` — look for reports mentioning z_erofs_shifted_transform
Step 4: After patching, confirm kernel version with `uname -r` returns 5.18.3 or later and reboot if necessary with `sudo reboot`

FAQ

What is CVE-2022-49464?

A buffer overflow vulnerability in the Linux kernel's EROFS (Enhanced Read-Only File System) ztailpacking feature that allows uncompressed tail clusters to exceed expected buffer boundaries, triggering use-after-free memory access during decompression operations.

Is CVE-2022-49464 being actively exploited?

No, this vulnerability is not listed on CISA's Known Exploited Vulnerabilities catalog and no public exploits are currently available.

What versions of Kernel are affected by CVE-2022-49464?

Linux kernel versions 5.18 through 5.18.2 are vulnerable; version 5.18.3 and later include the fix.

How do I check if my server is vulnerable to CVE-2022-49464?

Run `uname -r` and check if the output matches 5.18.0, 5.18.1, or 5.18.2; also verify EROFS is enabled with `grep CONFIG_EROFS /boot/config-$(uname -r)`.

Does Defensia detect CVE-2022-49464?

Yes — Defensia's CVE advisory scanner compares installed package versions against the NVD database. If the Linux kernel is installed on a monitored server, CVE-2022-49464 will appear in your dashboard with remediation steps.

Related Kernel CVEs

CVE-2026-64033CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Fix use-after-free in path file creation cleanup In the error path of rtrs_srv_create_path_files(), the sysfs root folders may already have been created and srv_path->kobj may already have been initialized. If a later step fails, the cleanup currently calls kobject_put(&srv_path->kobj) before rtrs_srv_destroy_once_sysfs_root_folders(srv_path). kobject_put() may drop the last reference to srv_path->kobj and invoke the release callback, rtrs_srv_release(), which frees srv_path. The following call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then dereferences srv_path internally to access srv_path->srv, resulting in a use-after-free. This failure path is reached before rtrs_srv_create_path_files() returns success, so the successful-path lifetime handling is not involved. Fix this by destroying the sysfs root folders before calling kobject_put(&srv_path->kobj), so srv_path is still valid while the helper accesses it. This issue was found by a static analysis tool I am developing.

CVE-2026-64037CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled When the TLC notification disables AMSDU for a TID, the MLD driver sets max_tid_amsdu_len to the sentinel value 1. The TSO segmentation path in iwl_mld_tx_tso_segment() checks for zero but not for this sentinel, allowing it to reach the num_subframes calculation: num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad) = (1 + 2) / (1534 + 2) = 0 This zero propagates to iwl_tx_tso_segment() which sets: gso_size = num_subframes * mss = 0 Calling skb_gso_segment() with gso_size=0 creates over 32000 tiny segments from a single GSO skb. This floods the TX ring with ~1024 micro-frames (the rest are purged), creating a massive burst of TX completion events that can lead to memory corruption and a subsequent use-after-free in TCP's retransmit queue (refcount underflow in tcp_shifted_skb, NULL deref in tcp_rack_detect_loss). The MVM driver is immune because it checks mvmsta->amsdu_enabled before reaching the num_subframes calculation. The MLD driver has no equivalent bitmap check and relies solely on max_tid_amsdu_len, which does not catch the sentinel value. Fix this by detecting the sentinel value (max_tid_amsdu_len == 1) at the existing check and falling back to non-AMSDU TSO segmentation. Also add a WARN_ON_ONCE guard after the num_subframes division as defense-in-depth to catch any future code paths that produce zero through a different mechanism.

CVE-2026-100075CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Fix srpt_alloc_rw_ctxs() unwind counters When srpt_alloc_rw_ctxs() fails partway through a multi-buffer indirect descriptor, the unwind path destroys RDMA contexts but leaves stale n_rw_ctx and n_rdma values (and a dangling rw_ctxs pointer). Later sq_wr_avail accounting in srpt_queue_response() or srpt_write_pending() can then subtract the wrong number of send queue credits. Reset the counters and clear rw_ctxs after freeing the heap allocation before returning an error.

CVE-2026-64035CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: igc: set tx buffer type for SMD frames Sashiko pointed out that igc_fpe_init_smd_frame() initializes igc_tx_buffer fields for an SMD skb, but does not set the buffer type: https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp Since igc_tx_buffer entries are reused, a stale XDP or XSK type can remain and make TX completion use the wrong cleanup path. Set the buffer type to IGC_TX_BUFFER_TYPE_SKB.

CVE-2026-64007CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: refresh tcphdr after skb_ensure_writable synproxy_tstamp_adjust() rewrites the TCP timestamp option in place and then patches the TCP checksum via inet_proto_csum_replace4() on the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and ipv6_synproxy_hook() obtain that pointer with skb_header_pointer() before calling in, so it may either alias skb->head directly or point at the caller's on-stack _tcph buffer. Between obtaining the pointer and using it, the function calls skb_ensure_writable(skb, optend), which on a cloned or non-linear skb invokes pskb_expand_head() and frees the old skb->head. After that point the cached th is stale: caller (ipv[46]_synproxy_hook) th = skb_header_pointer(skb, ..., &_tcph) synproxy_tstamp_adjust(skb, protoff, th, ...) skb_ensure_writable(skb, optend) pskb_expand_head() /* kfree(old skb->head) */ ... inet_proto_csum_replace4(&th->check, ...) /* writes into freed head, or into the caller's stack copy leaving the on-wire checksum stale */ The option bytes are written through skb->data and are fine; only the checksum update goes through th and so lands in the wrong place. The result is either a write into freed slab memory or a packet leaving with a checksum that does not match its payload. Fix by re-deriving th from skb->data + protoff immediately after skb_ensure_writable() succeeds, so the subsequent checksum update targets the linear, writable header.

References

Track CVEs across your fleet automatically

Defensia scans your Linux servers and tells you exactly which ones are running vulnerable versions — including CVE-2022-49464. Free for 1 server.

Get started free