high CVSS 7.1 EPSS 0.12%

CVE-2026-64243·Kernel vulnerability

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: simple-mux: Fix enum control bounds check simple_mux_control_put() rejects values greater than e->items, but enum control values are zero based. For the two-entry mux used by this driver, valid values are 0 and 1, so value 2 must be rejected as well. Accepting e->items can store an invalid mux state, pass it to the GPIO setter, and pass it on to the DAPM mux update path where it is used as an index into the enum text array. Use the same >= e->items check used by the ASoC enum helpers.

Severity
high
Software
Kernel
Fixed in
7.0.12
Published

How likely is exploitation

FIRST's Exploit Prediction Scoring System puts the probability of this CVE being exploited in the next 30 days at 0.12% — higher than 2% of all published CVEs. EPSS is an independent forecast of exploitation, not a severity rating: it says nothing about how much damage a successful attack does, which is what a CVSS score measures.

Read the two together. CVE-2026-64243 scores 7.1 on CVSS, so a successful attack would be serious — but at 0.12%, almost nobody is currently attempting it. That is a different situation from a flaw under mass exploitation, and it is usually the difference between patching on your next maintenance window and patching tonight.

Affected versions

From: 6.19

Until: 7.0.12

Fixed in: 7.0.12

How to fix this CVE

Update your Linux kernel to version 7.0.12 or later to patch the ASoC simple-mux enum control bounds validation flaw. This vulnerability allows invalid audio mux states to be set, potentially causing kernel memory corruption or unexpected audio routing behavior. Prioritize this update for systems using ASoC audio codec drivers, particularly those with two-entry mux configurations.

sudo dnf check-update kernel && sudo dnf update kernel

Defensia detects this vulnerability

How to check if you are affected

  1. Step 1: Check your current kernel version with 'uname -r' and compare against the fixed version 7.0.12
  2. Step 2: Verify ASoC codec drivers are loaded by running 'lsmod | grep -i asoc' to confirm the vulnerable component is present
  3. Step 3: Search kernel logs for ASoC enum control errors with 'journalctl -b | grep -i 'asoc\|audio\|mux'' to identify exploitation attempts
  4. Step 4: After patching, reboot and confirm the new kernel version with 'uname -r', then verify ASoC drivers load without errors using 'dmesg | grep -i asoc'

FAQ

What is CVE-2026-64243?

This vulnerability is a bounds checking flaw in the Linux kernel's ASoC simple-mux codec driver that fails to properly validate enum control values, allowing invalid mux states to be set and potentially corrupting kernel memory or causing undefined audio behavior.

Is CVE-2026-64243 being actively exploited?

No, CVE-2026-64243 is not listed in the CISA Known Exploited Vulnerabilities (KEV) catalog and no public exploits are available. However, local privilege escalation is theoretically possible through careful manipulation of audio codec controls.

What versions of Kernel are affected by CVE-2026-64243?

Linux kernel versions 6.19 through 7.0.11 are vulnerable. The fix is available in kernel version 7.0.12 and later.

How do I check if my server is vulnerable to CVE-2026-64243?

Run 'uname -r' to display your kernel version. If the output is between 6.19 and 7.0.11, your system is vulnerable. Additionally, confirm ASoC is in use with 'lsmod | grep asoc'.

Does Defensia detect CVE-2026-64243?

Yes — Defensia's CVE advisory scanner compares installed package versions against the NVD database. If Kernel is installed on a monitored server, CVE-2026-64243 will appear in your dashboard with remediation steps.

Related Kernel CVEs

CVE-2026-63795CVSS 10In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request.
CVE-2026-53398CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix SECINFO_NO_NAME decode error cleanup nfsd4_decode_secinfo_no_name() currently initializes sin_exp after decoding sin_style. If the XDR stream is truncated, the decoder returns nfserr_bad_xdr before sin_exp is initialized. Since commit 3fdc54646234 ("NFSD: Reduce amount of struct nfsd4_compoundargs that needs clearing"), the inline iops array is not cleared between RPC calls. A failed SECINFO_NO_NAME decode can therefore leave sin_exp holding stale union contents from a previous operation. The error response path still invokes nfsd4_secinfo_no_name_release(), which calls exp_put() on a non-NULL sin_exp. Initialize sin_exp before the first failable decode step, matching nfsd4_decode_secinfo().
CVE-2026-53399CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: nfsd: release layout stid on setlease failure nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via idr_alloc_cyclic() under cl_lock before returning to nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then fails, the error path frees the layout stateid directly with kmem_cache_free() without ever calling idr_remove(), leaving the IDR slot pointing at freed slab memory. Any subsequent IDR walker (states_show, client teardown) dereferences the dangling pointer. The correct teardown for an IDR-published stid is nfs4_put_stid(), which removes the IDR slot under cl_lock, dispatches sc_free (nfsd4_free_layout_stateid) to release ls->ls_file via nfsd4_close_layout(), and drops the nfs4_file reference in its tail. A second issue blocks that switch: nfsd4_free_layout_stateid() unconditionally inspects ls->ls_fence_work via delayed_work_pending() under ls_lock, but INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only after the setlease call. On the setlease-failure path the destructor would touch an uninitialized delayed_work. nfsd4_alloc_layout_stateid() nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */ nfsd4_layout_setlease() /* fails */ nfs4_put_stid() nfsd4_free_layout_stateid() delayed_work_pending(&ls->ls_fence_work) /* needs INIT */ nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */ put_nfs4_file() Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK initialization above the nfsd4_layout_setlease() call, and replace the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup with a single nfs4_put_stid(stp).
CVE-2026-98365CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access mr_check_range() validates that [iova, iova+length) falls within the registered MR range using wraparound-prone arithmetic: if (iova < mr->ibmr.iova || iova + length > mr->ibmr.iova + mr->ibmr.length) A remote peer can craft an RDMA-Write/Read RETH so that iova + length wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the check. rxe_mr_iova_to_index() then computes a huge index (int idx, only guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences mr->page_info[huge], causing an out-of-bounds read/write and a kernel oops that is triggerable by an unauthenticated remote peer. Rewrite the check in overflow-safe form; the first two clauses guarantee that the subsequent subtractions do not underflow: if (iova < mr->ibmr.iova || length > mr->ibmr.length || iova - mr->ibmr.iova > mr->ibmr.length - length) With the fix, mr_check_range() returns -EINVAL for the crafted iova and the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB.
CVE-2026-98323CVSS 9.8In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Bound fragmented header copies by the remaining length siw_get_hdr() can receive an extended DDP/RDMAP header across more than one TCP callback. The first callback may receive most of the header, while the next one still limits the copy to hdrlen - MIN_DDP_HDR instead of the number of missing bytes. This makes the destination move past the end of the header and overwrite the receive state, including fpdu_part_rcvd. A later callback can then use a negative fpdu_part_rcvd value as a copy offset, which creates an OOB write. Use the number of header bytes already received when calculating the next copy length.

References

Track CVEs across your fleet automatically

Defensia scans your Linux servers and tells you exactly which ones are running vulnerable versions — including CVE-2026-64243. Free for 1 server.

Get started free